UAE Customer Orders a 4-Axle Lowbed Trailer | CHENLU

UAE Customer Orders a 4-Axle Lowbed Trailer

Blue CHENLU four-axle lowbed trailer ordered by a UAE customer
The completed four-axle lowbed trailer at the CHENLU factory.

A customer in the United Arab Emirates has purchased a blue 4-axle lowbed trailer from CHENLU. The completed trailer has a fixed gooseneck, a long dropped deck, four rear axles and two loading ramps.

The order uses a rear-loading layout. The gooseneck stays at the front of the trailer, while machinery enters from the back and moves forward onto the main deck. Along both sides, the frame includes tie-down points for securing the machine after it is positioned.

The Fixed Gooseneck Leaves a Long, Open Deck

The front gooseneck is part of the main frame and remains connected during loading. Behind it, the deck runs without a raised centre section, giving tracked or wheeled equipment a clear area for positioning. The final loaded position still depends on the machine's weight, support points and centre of gravity.

Front three-quarter view of the fixed-gooseneck lowbed trailer
Fixed gooseneck, landing gear and open main deck.

Two Ramps Form the Rear Loading Path

Two separate steel ramps are fitted at the back of the trailer. Each ramp provides a path for one side of the machine. Large coil springs are mounted beside the ramp pivots to assist movement when the ramps are lowered or raised.

Ramp spacing is set around the equipment that will use the trailer. Track width, tyre position and the machine's lowest ground-clearance point must line up with the loading path before the final drawing is approved.

Twin spring-assisted loading ramps on the four-axle lowbed trailer
Twin rear ramps with visible coil-spring assistance.

Four Axles Sit Beneath the Rear Deck

The running gear is grouped beneath the back section of the deck. Mechanical leaf springs are visible between the axles, and the wheel area remains open for inspection from the side. Four axles change how the rear portion of the load is distributed, but axle count alone does not establish the trailer's rated payload.

Four-axle running group beneath the rear deck of the lowbed trailer
The four-axle group beneath the rear deck.

The rear frame carries the lamps, reflective markings and lower guards. Chains hold the upright ramps in their travel position while the trailer is not being loaded.

Rear three-quarter view of the blue four-axle lowbed semi trailer
Rear view of the four axles, twin ramps and finished deck.

Completed for the UAE Customer

The trailer is complete and remains at the factory while shipment is arranged. The fixed gooseneck, deck, four-axle running group and rear ramps have all been installed as part of the finished build.

For other machinery-transport configurations, visit the CHENLU low bed trailer range.

Request a Four-Axle Lowbed Configuration

Send the machine model, transport weight, overall dimensions, track or tyre width, ground clearance, tractor model, quantity and destination. CHENLU will use these details to review the deck, axle group and ramp layout.

Contact CHENLU

    Get a Quote Now


    Submit your inquiry to receive a precise quote and professional advice for your project.