Four 60-Tonne 3-Axle Flatbed Semi-Trailers Packed for Shipment to Oman

An Oman customer ordered four three-axle flatbed semi-trailers from CHENLU, each configured for a 60-tonne payload requirement. After production, the customer visited the factory to inspect the decks, frames, tri-axle groups and finished condition. Once the inspection was complete, the four trailers were packed two per stack, forming two transport units for shipment to Oman.

Oman customer representatives and the CHENLU team after the flatbed trailer factory inspection
The Oman customer and CHENLU team after the factory inspection.
Order item Batch configuration
Quantity 4 trailers
Trailer type 3-axle flatbed semi-trailer
Payload requirement 60 tonnes per trailer
Deck Straight open platform
Colour Green
Packing Two trailers per stack; two stacks in total
Destination Oman
Four green 60-tonne three-axle flatbed semi-trailers packed in two stacks at the CHENLU factory
Four green three-axle flatbed semi-trailers packed into two transport stacks.

Four Green 60-Tonne Three-Axle Flatbed Trailers

The four trailers have the same green finish, straight open deck and rear tri-axle layout. With no fixed side walls or roof, the deck remains accessible from both sides and above for forklift or crane loading. Multiple securing positions are arranged along the deck edge for chains or straps selected to suit the cargo.

Below the deck, the finished trailers show front landing legs, rear axle groups and the associated chassis equipment. Rear lamps and reflective markings are installed at the ends. All four units use the same basic layout and entered the packing stage together after inspection.

End view of stacked green flatbed semi-trailers showing the open decks and three-axle wheel groups
The end view shows the open decks and tri-axle groups within the stacked arrangement.

How Is the 60-Tonne Requirement Carried by a Three-Axle Flatbed?

Sixty tonnes is the confirmed payload requirement for each trailer in this order. The cargo load does not act on the three rear axles alone. It passes through the deck, crossmembers and main beams; part is carried by the trailer axle group, while the front reaction is transferred through the kingpin and fifth wheel to the tractor.

The frame, running gear, suspension, tyres, braking system and tractor connection therefore need to work as one configuration. Cargo position also changes how the load is shared between the kingpin and the rear axle group, so the approved loading position and securing arrangement remain part of the operating plan.

An open flatbed can carry steel, pipe bundles, machinery, construction materials or packed freight when the deck support and restraint arrangement match the load. CHENLU’s 60 Ton 3 Axle Flatbed Semi Trailer page explains the related deck and load-distribution checks.

Two Trailers Packed in Each Stack

For this four-unit shipment, CHENLU divided the trailers into two groups. In each group, one trailer was positioned above the other. The wheel groups and chassis components sit within the space between the upper and lower frames, while transport supports and chains hold the packed position.

The side and end views show the upper deck running parallel with the lower trailer. Packing two trailers together turns the four finished units into two transport stacks for onward lifting and shipment. At destination, lifting equipment can separate the upper and lower trailers so that each unit returns to its independent operating position.

Side and rear view of two stacked pairs of three-axle flatbed semi-trailers for Oman
Two trailers are packed in each stack, creating two transport units for the four-trailer order.

Prepared for Shipment to Oman

After inspection and packing, the four 60-tonne three-axle flatbed semi-trailers entered the shipment-preparation stage. The two stacks are now arranged inside the CHENLU workshop for onward transport to Oman.

The factory photos record both the completed trailer configuration and the packing method used for this multi-unit order.

Two completed stacks of green three-axle flatbed semi-trailers prepared for Oman
The completed stacks are ready for the next stage of transport to Oman.

See the CHENLU flatbed semi-trailer range for other open-deck and axle configurations.

    Get a Quote Now


    Submit your inquiry to receive a precise quote and professional advice for your project.