60 TON LOWBED · 3 AXLES · TANZANIA
60 Ton 3 Axle Lowbed Trailer for Sale in Tanzania
Payload starts at 60 tonnes. This fixed-gooseneck lowbed measures 13 m long and 3 m wide, with three axles, mechanical suspension and two spring-assisted rear ramps. It is used for excavators, wheel loaders, bulldozers and other wheeled or tracked machinery.
LOADING LAYOUT
Low Deck and Rear Loading Ramps
Machinery enters from the rear and travels on the main deck between the fixed gooseneck and the three-axle group.
Between the neck and axles
The main deck sits below the raised front neck and the rear axle platform. Machinery travels on this lower section.
Two spring-assisted ramps
The ramps lower for loading and stand upright for travel. Each ramp has a spring assembly at its base.
CHASSIS DETAILS
Running Gear and Front Support
Mechanical leaf springs
Leaf-spring packs sit on both sides of the rear axle group.
Two landing legs
They support the front of the trailer when it is uncoupled from the tractor.
Three-axle group
Adjacent axle centres are spaced 1,310 mm apart in this configuration.
MACHINE FIT
Weight, Deck Space and Rear Entry
The trailer is 13 m long and 3 m wide overall. Those dimensions describe the whole vehicle, not the clear space available for a machine.
Transport weight
Payload starts at 60 tonnes. The machine's weight and position on the deck both matter to the trailer and tractor setup.
Usable deck space
Compare the machine's transport length and width with the low deck itself, rather than the trailer's outer dimensions.
Ramp entry
Tyre or track spacing and ground clearance need to suit the two rear ramps before the machine can drive aboard.
SPECIFICATIONS
60 Ton 3 Axle Lowbed Trailer Specifications
Size and layout
- Starting payload
- From 60 tonnes
- Overall length
- 13,000 mm
- Overall width
- 3,000 mm
- Overall height, ramps upright
- 3,950 mm
- Front connection
- Fixed gooseneck
- Rear axle group
- 3 axles
Running gear and loading
- Axle centre spacing
- 1,310 mm between adjacent axles
- Suspension
- Mechanical leaf springs
- Leaf-spring pack
- 10 leaves, 13 mm thick
- Tyre size
- 315/80R22.5
- Rear loading
- Two spring-assisted ramps
- Front support
- Two landing legs
FACTORY VIDEO
60 Ton 3 Axle Lowbed Trailer Video
The video starts with a full view of the finished trailer, then moves along the side frame and three-axle wheel group. Close-ups show the upright rear ramps and their springs, the rear lights and the suspension beneath the trailer.
GENERAL ARRANGEMENT
60 Ton 3 Axle Lowbed Trailer Drawing
This fixed-gooseneck lowbed is 13,000 mm long and 3,000 mm wide overall, with three axles behind the lower deck. The overall width is not the clear loading-deck width.
Optional Parts And Accessories
Semi-Trailer Axle Support Plate
American-Style Axle
Trailer Suspension Parts
Trailer Suspension Support Leg
WABCO Brake Valve
FUHUA (TUWA) Trailer Axle
German-Style Trailer Suspension
BPW Trailer Axle
Why Trust Chenlu?
Factory-Direct Manufacturing
CHENLU presents its own semi-trailer manufacturing base with modern workshops, CNC cutting, automatic welding lines and painting facilities. This supports direct communication between the buyer, engineering team and production team.
OEM/ODM Configuration Review
The published customization scope includes axle number and load configuration, suspension type, ride height, frame reinforcement, deck requirements, branding, colour and logo. The final scope should be confirmed against the cargo, tractor and destination route.
Process-Based Quality Control
The factory workflow covers material preparation, main-beam welding, frame assembly, surface treatment, painting, final assembly, inspection and testing. Quality checks should be recorded against the actual project configuration before delivery.
B2B Export and Project Support
CHENLU works with fleet owners, contractors, distributors and project buyers across logistics, construction, mining and heavy-equipment transport applications. The quotation should confirm the tractor interface, route, axle-load requirements and local permits.
Meet Chenlu and Review the Manufacturing Process
Customer visits support direct communication between buyers, engineering teams and the manufacturing department before the final configuration is confirmed.
Follow the Project from Delivery to Customer Feedback
Use approved delivery photos, project records and customer comments to present the completed communication and delivery process.
Publish the Original Customer Message with Permission
Add an approved customer comment, delivery record or project feedback here after the customer confirms the wording and image usage.
Approved delivery photo or project record.
Original customer message with permission.
Approved feedback about communication and support.
Related Products
Removable Gooseneck Trailer (RGN)
100 Ton 4 Axle Detachable Gooseneck Lowbed Trailer | CHENLU
View Product ↗
Low Bed Trailer
100 Ton 4-Axle Fixed-Gooseneck Lowbed Trailer| CHENLU
View Product ↗
Low Bed Trailer
13m 3 Axle Lowbed Semi Trailer with Rear Ramps
View Product ↗
Low Bed Trailer
2-Axle Fixed Gooseneck Lowbed Trailer
View Product ↗
Removable Gooseneck Trailer (RGN)
3 Axle Detachable Gooseneck Trailer
View Product ↗
Low Bed Trailer
4 Axle Folding Gooseneck Lowbed Trailer | CHENLU
View Product ↗PRODUCT FAQ
60 Ton 3 Axle Lowbed Trailer FAQ
Does 60 ton mean cargo weight or total trailer weight?
It means the starting cargo payload for this configuration. The trailer's own weight and the tractor are separate. The machine's position on the deck also matters when checking the load on each axle group.
Can the gooseneck be removed for front loading?
No. This lowbed has a fixed gooseneck. Machines enter from the rear, using the two loading ramps.
Are the rear ramps hydraulic?
No. The two rear ramps on this trailer are spring-assisted. They fold up behind the three-axle group for travel.
Will my excavator fit on this low loader trailer?
Check the machine's transport weight, length, track width and lowest ground clearance against the deck and ramp layout. The stated 3,000 mm is the trailer's overall width; it is not a confirmed clear deck width.
How large is the trailer with its ramps upright?
The trailer is 13,000 mm long and 3,000 mm wide overall. Its overall height is 3,950 mm with the ramps upright. A loaded machine may increase the transport height.
What suspension and tyres are on this three-axle build?
It has mechanical leaf-spring suspension and 315/80R22.5 tyres. The three rear axles are spaced 1,310 mm apart, measured between adjacent axle centres.